Aspect Model PerformanceAndDurability

urn:samm:io.BatteryPass.Performance:1.2.0#PerformanceAndDurability
Battery performance and durability data model Copyright ? 2024 Circulor (for and on behalf of the Battery Pass Consortium). This work is li-censed under a Creative Commons License Attribution-NonCommercial 4.0 International (CC BY-NC 4.0). Readers may reproduce material for their own publications, as long as it is not sold com-mercially and is given appropriate attribution.

Overview

Aspect Model Diagram

Properties

batteryCondition

'- Expected battery lifetime expressed in cycles, and reference test used. - Their expected life-time under the reference conditions for which they have been designed in terms of cycles, except for non-cycle applications, and calendar years.
Name
batteryCondition
Characteristic
SingleEntity
Type urn:samm:io.BatteryPass.Performance:1.2.0#BatteryConditionEntity
Optional
No
In payload
Yes
Payload key
batteryCondition

batteryTechicalProperties

This property covers all perfromance related properties
Name
batteryTechicalProperties
Characteristic
SingleEntity
Type urn:samm:io.BatteryPass.Performance:1.2.0#BatteryTechnicalPropertiesEntity
Optional
No
In payload
Yes
Payload key
batteryTechicalProperties

Entities

BatteryConditionEntity

Covers all battery lifetime relevant properties

Properties

energyThroughput
The data attribute should be reported as measured for further potential processing. In addition, the normalisation by capacity may add a further useful value that ensures comparability among battery sizes. DIN DKE Spec 99100 chapter reference: 6.7.6.7
Name
energyThroughput
Characteristic
Measurement
Unit
  • kilowatt hour
  • Symbol kW·h
  • Code KWH
  • Conversion factor 3.6 × 10Ôü J
Type http://www.w3.org/2001/XMLSchema#double
Optional
No
In payload
Yes
Payload key
energyThroughput
capacityThroughput
The data attribute should be reported as measured for further potential processing. In addition, the normalisation by capacity may add a further useful value that ensures comparability among battery sizes. DIN DKE Spec 99100 chapter reference: 6.7.6.8
Name
capacityThroughput
Characteristic
SingleEntity
Type urn:samm:io.BatteryPass.Performance:1.2.0#CapacityThroughputEntity
Optional
No
In payload
Yes
Payload key
capacityThroughput
numberOfFullCycles
Number of (full) charging and discharging cycles. DIN DKE Spec 99100 chapter reference: 6.7.6.3
Name
numberOfFullCycles
Characteristic
SingleEntity
Type urn:samm:io.BatteryPass.Performance:1.2.0#NumberOfFullCyclesEntity
Optional
No
In payload
Yes
Payload key
numberOfFullCycles
SOCE
Definition based on UNECE GTR 22: The measured or on-board UBE performance at a specific point in its lifetime, expressed as a percentage of the certified usable battery energy. DIN DKE Spec 99100 chapter reference: 6.7.2.7
Name
stateOfCertifiedEnergy
Characteristic
SingleEntity
Type urn:samm:io.BatteryPass.Performance:1.2.0#StateOfCertifiedEnergyEntity
Optional
No
In payload
Yes
Payload key
stateOfCertifiedEnergy
capacityFade
The capacity fade is the ´┐¢Decrease over time and upon usage in the amount of charge that a battery can deliver at the rated voltage, with respect to the original rated capacity´┐¢ (see BattReg Annex IV (2)) as declared by the manufacturer. DIN DKE Spec 99100 chapter reference: 6.7.2.4
Name
capacityFade
Characteristic
SingleEntity
Type urn:samm:io.BatteryPass.Performance:1.2.0#CapacityFadeEntity
Optional
No
In payload
Yes
Payload key
capacityFade
remainingEnergy
Definition from UNECE GTR 22, applicable only to EVs. The energy supplied by the battery from the beginning of the test procedure used for certification until the applicable break-off criterion of the test procedure used for certification is reached. DIN DKE Spec 99100 chapter reference: 6.7.2.6
Name
remainingEnergy
Characteristic
SingleEntity
Type urn:samm:io.BatteryPass.Performance:1.2.0#RemainingEnergyEntity
Optional
No
In payload
Yes
Payload key
remainingEnergy
remainingCapacity
The in-use data attribute on capacity, corresponding with the definition of rated capacity. DIN DKE Spec 99100 chapter reference: 6.7.2.3
Name
remainingCapacity
Characteristic
SingleEntity
Type urn:samm:io.BatteryPass.Performance:1.2.0#RemainingCapacityEntity
Optional
No
In payload
Yes
Payload key
remainingCapacity
negativeEvents
Name
negativeEvents
Characteristic
List
Has a certain order
Duplicates allowed
Type urn:samm:io.BatteryPass.Performance:1.2.0#NegativeEventEntity
Optional
No
In payload
Yes
Payload key
negativeEvents
temperatureInformation
The battery passport must include periodically recorded information on the operating environmental conditions, including temperature. DIN DKE Spec 99100 chapter reference: 6.7.7.5 - 8
Name
temperatureInformation
Characteristic
SingleEntity
Type urn:samm:io.BatteryPass.Performance:1.2.0#TemperatureConditionsEntity
Optional
No
In payload
Yes
Payload key
temperatureInformation
remainingPowerCapability
'- Original power capability (in Watts) and limits, with temperature range when relevant. - The amount of energy that a battery is capable to provide over a given period of time under reference conditions. - Power capability at 80% and 20% state of charge. DIN DKE Spec 99100 chapter reference: 6.7.3.3
Name
remainingPowerCapability
Characteristic
List
Has a certain order
Duplicates allowed
Type urn:samm:io.BatteryPass.Performance:1.2.0#RemainingPowerCapabilityEntity
Optional
No
In payload
Yes
Payload key
remainingPowerCapability
powerFade
´┐¢Power fade (in %) means the decrease over time and upon usage in the amount of power that a battery can deliver at the rated voltage.´┐¢ (see BattReg Annex IV (4)). Power fade should be calculated using original and remaining power capability following the formula below: Pfade(x) = (1-P(x)) / PBOL" ´┐¢100" %" where x is the aging parameter (e.g. storage time, number of cycles, etc.); P(x) is the power capability at aging parameter x; PBOL is the power capability at begin of life. DIN DKE Spec 99100 chapter reference: 6.7.3.4
Name
powerFade
Characteristic
Measurement
Unit
  • percent
  • Symbol %
  • Code P1
  • Conversion factor 1 × 10Ôü╗²
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
powerFade
roundTripEfficiencyFade
Energy round trip efficiency fade should be calculated using the initial round trip energy efficiency and remaining round trip energy efficiency following the formula below: RTEfade (x) = (1-RTE(x)) / RTEBOL ´┐¢100" %" where x is the aging parameter (e.g. storage time, number of cycles, etc.); RTE(x) is the round trip energy efficiency at aging parameter x; RTEBOL is the round trip energy efficiency at begin of life. DIN DKE Spec 99100 chapter reference: 6.7.4.5
Name
roundTripEfficiencyFade
Characteristic
Measurement
Art. 10: Annex IV Part A (4) (only definition); Article 14: Annex VII Part A (3)
Unit
  • percent
  • Symbol %
  • Code P1
  • Conversion factor 1 × 10Ôü╗²
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
roundTripEfficiencyFade
evolutionOfSelfDischarge
´┐¢Evolution of self-discharge rates´┐¢ is the change of self-discharge over time and usage, as percentage calculated from the initial and current self-discharge rate. DIN DKE Spec 99100 chapter reference: 6.7.4.8
Name
evolutionOfSelfDischarge
Characteristic
SingleEntity
Type urn:samm:io.BatteryPass.Performance:1.2.0#EvolutionOfSelfDischargeEntity
Optional
No
In payload
Yes
Payload key
evolutionOfSelfDischarge
currentSelfDischargingRate
The current self-discharge rate is the change of the self-discharge rate in an idle state of the battery in reference conditions (temperature etc.) at aging parameter x, e.g. after a certain amount of storage time or, number of cycles. DIN DKE Spec 99100 chapter reference: 6.7.4.7
Name
currentSelfDischargingRate
Characteristic
SingleEntity
Type urn:samm:io.BatteryPass.Performance:1.2.0#CurrentSelfDischargingRateEntity
Optional
No
In payload
Yes
Payload key
currentSelfDischargingRate
internalResistanceIncrease
The internal resistance increase over time and upon usage should be defined based on the ratio of current and initial values as follows: Rincrease(x) = (R(x) - RBOL) / RBOL ´┐¢ 100 % where x is the aging parameter (e.g. storage time, number of cycles, etc.;); R(x) is the internal resistance at the aging parameter x; and RBOL is the internal resistance at begin of life. The battery passport can include additional information about the internal resistance increase on battery cell and battery module level, if available. It should be defined and calculated analogously to the requirements on battery pack level above. DIN DKE Spec 99100 chapter reference: 6.7.5.3
Name
internalResistanceIncrease
Characteristic
List
Has a certain order
Duplicates allowed
Type urn:samm:io.BatteryPass.Performance:1.2.0#InternalResistanceIncreaseEntity
Optional
No
In payload
Yes
Payload key
internalResistanceIncrease
roundTripEfficiencyat50PerCentCycleLife
Initial round trip energy efficiency shall be measured at reference conditions that include the specification of ´┐¢50 % of cycle-life´┐¢. Test methods and reference conditions should separately consider non-cycle applications and batteries with very long cycle-life. DIN DKE Spec 99100 chapter reference: 6.7.4.3
Name
roundTripEfficiencyat50PerCentCycleLife
Characteristic
Measurement
Unit
  • percent
  • Symbol %
  • Code P1
  • Conversion factor 1 × 10Ôü╗²
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
roundTripEfficiencyat50PerCentCycleLife
remainingRoundTripEnergyEfficiency
The battery passport shall include information, where possible, about the remaining round trip energy efficiency as information on the state of health of the battery The update frequency of remaining round trip energy efficiency should be aligned with the update frequency of round trip energy efficiency fade and should be provided upon change of the battery status. DIN DKE Spec 99100 chapter reference: 6.7.4.4
Name
remainingRoundTripEnergyEfficiency
Characteristic
SingleEntity
Type urn:samm:io.BatteryPass.Performance:1.2.0#RemainingRoundTripEnergyEfficiencyEntity
Optional
No
In payload
Yes
Payload key
remainingRoundTripEnergyEfficiency
SoC
The Battery Pass consortium proposes to change the definition to: "available capacity in a battery expressed as a percentage of remaining capacity" to reflect use of SoC in practice. DIN DKE Spec 99100 chapter reference: 6.7.2.8
Name
stateOfCharge
Characteristic
SingleEntity
Type urn:samm:io.BatteryPass.Performance:1.2.0#StateOfChargeEntity
Optional
No
In payload
Yes
Payload key
stateOfCharge

BatteryTechnicalPropertiesEntity

Covers all Capability related data attributes

Properties

originalPowerCapability
Pre-use power capability: Definition of power capability as given in Battery Regulation. Annex IV Part B, point 4 --> measurement at 80 % and 20 % SoC required. This requirement may not be implementable for remaining power capability and power fade(see below). It, thus, should be reviewed together with SoC definition. DIN DKE Spec 99100 chapter reference: 6.7.3.2
Name
originalPowerCapability
Characteristic
List
Has a certain order
Duplicates allowed
Type urn:samm:io.BatteryPass.Performance:1.2.0#PowerCapabilityAtEntity
Optional
No
In payload
Yes
Payload key
originalPowerCapability
ratedMaximumPower
This data point describes the value of maximum permitted power the battery is rated for and reflects the data relevant for power limits. DIN DKE Spec 99100 chapter reference: 6.7.3.2
Name
ratedMaximumPower
Characteristic
Measurement
Unit
  • kilowatt
  • Symbol kW
  • Code KWT
  • Conversion factor 10³ W
Type http://www.w3.org/2001/XMLSchema#double
Optional
No
In payload
Yes
Payload key
ratedMaximumPower
PowerCapabilityRatio
Provides information on nominal/recommended charge rate (C-rate); equal to regulation definition.
Name
powerCapabilityRatio
Characteristic
Measurement
Ratio between nominal allowed battery power (W) and battery energy (Wh).
Unit
  • percent
  • Symbol %
  • Code P1
  • Conversion factor 1 × 10Ôü╗²
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
powerCapabilityRatio
ratedEnergy
The certified usable battery energy is the usable battery energy according to the procedure in the UN GTR No 22 as determined during the certification of the vehicle. DIN DKE Spec 99100 chapter reference: 6.7.2.5
Name
ratedEnergy
Characteristic
Measurement
Unit
  • kilowatt hour
  • Symbol kW·h
  • Code KWH
  • Conversion factor 3.6 × 10Ôü J
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
ratedEnergy
ExpectedNumberOfCycles
Expected battery lifetime expressed in cycles. The exception for non-cycle applications in Article 10 appears sensible, but is not included in the Annex XIII provision. The data attribute is defined by measurement conditions of the cycle-life test such as the C-Rate (see below) and the depth of discharge in the cycle-life test DIN DKE Spec 99100 chapter reference: 6.7.6.3
Name
expectedNumberOfCycles
Characteristic
Quantifiable
Duration
Unit
  • cycle
  • Code B7
Type http://www.w3.org/2001/XMLSchema#long
Optional
No
In payload
Yes
Payload key
expectedNumberOfCycles
initialSelfDischarge
Initial self-discharge in % of capacity per unit of time in defined conditions (temperature range etc) as pre-use metric. DIN DKE Spec 99100 chapter reference: 6.7.4.6
Name
initialSelfDischarge
Characteristic
Measurement
Unit
  • percent per month
  • Symbol %/mo
  • Code H71
Type http://www.w3.org/2001/XMLSchema#double
Optional
No
In payload
Yes
Payload key
initialSelfDischarge
roundtripEfficiency
Energy round trip efficiency is the ratio of the net energy delivered by a battery during a discharge test to the total energy required to restore the initial state of charge by a standard charge (see BattReg Annex IV (6)). DIN DKE Spec 99100 chapter reference: 6.7.4.2
Name
roundtripEfficiency
Characteristic
Measurement
Unit
  • percent
  • Symbol %
  • Code P1
  • Conversion factor 1 × 10Ôü╗²
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
roundtripEfficiency
ratedCapacity
´┐¢Rated capacity´┐¢ is the total number of ampere-hours (Ah) that can be withdrawn from a fully charged battery under reference conditions (see BattReg Annex IV (1)). DIN DKE Spec 99100 chapter reference: 6.7.2.2
Name
ratedCapacity
Characteristic
Measurement
Unit
  • ampere hour
  • Symbol A·h
  • Code AMH
  • Conversion factor 3.6 × 10³ C
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
ratedCapacity
initialInternalResistance
The battery passport can include additional information about the initial internal resistance on battery module level, if available. It should be defined and calculated analogously as the requirements on battery pack level above. DIN DKE Spec 99100 chapter reference: 6.7.5.2
Name
initialInternalResistance
Characteristic
List
Has a certain order
Duplicates allowed
Type urn:samm:io.BatteryPass.Performance:1.2.0#InternalResistanceEntity
Optional
No
In payload
Yes
Payload key
initialInternalResistance
expectedLifetime
The battery passport must include information about the expected battery lifetime in calendar years. The update interval must be upon placement on the market and upon change of the battery status. DIN DKE Spec 99100 chapter reference: 6.7.6.2
Name
expectedLifetime
Characteristic
Measurement
Unit
  • year
  • Symbol y
  • Code ANN
  • Conversion factor 3.15576 × 10ÔüÀ s
Type http://www.w3.org/2001/XMLSchema#short
Optional
No
In payload
Yes
Payload key
expectedLifetime
cRate
As a non-mandatory data point the battery passport should include the ratio between nominal battery power in W and battery energy in Wh. It aims to provide an indication of the applicable discharge and charge rate in terms of rated capacity (C-rate) (see BattReg Annex IV Part B(2)). The update interval should be upon placement on the market and upon change of the battery status. DIN DKE Spec 99100 chapter reference: 6.7.3.6
Name
cRate
Characteristic
Measurement
Unit
  • C
  • Symbol C
Type http://www.w3.org/2001/XMLSchema#float
Optional
Yes
In payload
Yes
Payload key
cRate
nominalVoltage
Nominal voltage the battery is rated for. DIN DKE Spec 99100 chapter reference: 6.7.2.11
Name
nominalVoltage
Characteristic
Measurement
s
Unit
  • volt
  • Symbol V
  • Code VLT
  • Conversion factor V
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
nominalVoltage
minimumVoltage
Minimum voltage the battery is rated for. DIN DKE Spec 99100 chapter reference: 6.7.2.9
Name
minimumVoltage
Characteristic
Measurement
Unit
  • volt
  • Symbol V
  • Code VLT
  • Conversion factor V
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
minimumVoltage
maximumVoltage
Maximum voltage the battery is rated for. DIN DKE Spec 99100 chapter reference: 6.7.2.10
Name
maximumVoltage
Characteristic
Measurement
Unit
  • volt
  • Symbol V
  • Code VLT
  • Conversion factor V
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
maximumVoltage
capacityThresholdForExhaustion
The percentage of SOCE, above which the battery is still considered operational as EV battery in its current life, as provided by the economic operator. DIN DKE Spec 99100 chapter reference: 6.7.6.9
Name
capacityThresholdForExhaustion
Characteristic
Measurement
Unit
  • percent
  • Symbol %
  • Code P1
  • Conversion factor 1 × 10Ôü╗²
Type http://www.w3.org/2001/XMLSchema#double
Optional
No
In payload
Yes
Payload key
capacityThresholdForExhaustion
lifetimeReferenceTest
The exception for non-cycle applications as mentioned in "Expected lifetime: Number of charge-discharge cycles" should apply to this data attribute as well. DIN DKE Spec 99100 chapter reference: 6.7.6.5
Name
lifetimeReferenceTest
Characteristic
Type http://www.w3.org/2001/XMLSchema#anyURI
Optional
No
In payload
Yes
Payload key
lifetimeReferenceTest
cRateLifeCycleTest
The C-rate should be provided separately for both the charge and discharge of the battery, if applicable. The exception for non-cycle applications as mentioned in "Expected lifetime: Number of charge-discharge cycles" should apply to this data attribute as well. DIN DKE Spec 99100 chapter reference: 6.7.6.6
Name
cRateLifeCycleTest
Characteristic
Quantifiable
Duration
Unit
  • C
  • Symbol C
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
cRateLifeCycleTest
temperatureRangeIdleState
Upper an lower boundary of the surrounding temperature range, which the battery can safely withstand. DIN DKE Spec 99100 chapter reference: 6.7.6.3-4
Name
temperatureRangeIdleState
Characteristic
Trait
Reference
Type http://www.w3.org/2001/XMLSchema#double
Optional
No
In payload
Yes
Payload key
temperatureRangeIdleState
Constraints
  • TemperatureRange
    >=
    DefaultScalarValue[value=-20.0, typeUri='DefaultScalar[urn='http://www.w3.org/2001/XMLSchema#double']']
    ...
    < DefaultScalarValue[value=60.0, typeUri='DefaultScalar[urn='http://www.w3.org/2001/XMLSchema#double']']

CapacityFadeEntity

Properties

capacityFadeValue
Name
capacityFadeValue
Characteristic
Measurement
Unit
  • percent
  • Symbol %
  • Code P1
  • Conversion factor 1 × 10Ôü╗²
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
capacityFadeValue
lastUpdate
Timestamp for dynamic data attributes show the last update time.
Name
lastUpdate
Characteristic
Type http://www.w3.org/2001/XMLSchema#dateTime
Optional
No
In payload
Yes
Payload key
lastUpdate

CapacityThroughputEntity

Properties

capacityThroughputValue
Name
capacityThroughputValue
Characteristic
Measurement
Unit
  • ampere hour
  • Symbol A·h
  • Code AMH
  • Conversion factor 3.6 × 10³ C
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
capacityThroughputValue
lastUpdate
Timestamp for dynamic data attributes show the last update time.
Name
lastUpdate
Characteristic
Type http://www.w3.org/2001/XMLSchema#dateTime
Optional
No
In payload
Yes
Payload key
lastUpdate

CurrentSelfDischargingRateEntity

Properties

currentSelfDischargingRateEntity
Name
currentSelfDischargingRateEntity
Characteristic
Measurement
Unit
  • percent
  • Symbol %
  • Code P1
  • Conversion factor 1 × 10Ôü╗²
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
currentSelfDischargingRateEntity
lastUpdate
Timestamp for dynamic data attributes show the last update time.
Name
lastUpdate
Characteristic
Type http://www.w3.org/2001/XMLSchema#dateTime
Optional
No
In payload
Yes
Payload key
lastUpdate

EvolutionOfSelfDischargeEntity

Properties

evolutionOfSelfDischargeEntityValue
Name
evolutionOfSelfDischargeEntityValue
Characteristic
Measurement
Unit
  • percent
  • Symbol %
  • Code P1
  • Conversion factor 1 × 10Ôü╗²
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
evolutionOfSelfDischargeEntityValue

InternalResistanceEntity

The internal resistance is ´┐¢a quotient of change of voltage of a battery by the corresponding change in discharge current under specified conditions´┐¢ (IEV 482 03 36).

Properties

ohmicResistance
Initial (Pre-Use) internal resistance on battery pack level. Definition of internal resistance should differ from regulation definition, as "opposition" is not an electrotechnical term and may be based on IEV 131-12-04: "internal resistance means the absolute value of the quotient of the voltage drop between the terminals by the electric current increase in the battery circuit during a current pulse"
Name
ohmicResistance
Characteristic
Measurement
Unit
  • ohm
  • Symbol Ôäª
  • Code OHM
  • Conversion factor Ôäª
Type http://www.w3.org/2001/XMLSchema#double
Optional
No
In payload
Yes
Payload key
ohmicResistance
batteryComponent
Name
batteryComponent
Characteristic
Enumeration
Values
  • pack
  • module
  • cell
Type http://www.w3.org/2001/XMLSchema#string
Optional
No
In payload
Yes
Payload key
batteryComponent

InternalResistanceIncreaseEntity

Properties

internalResistanceIncreaseValue
Name
internalResistanceIncreaseValue
Characteristic
Measurement
Unit
  • percent
  • Symbol %
  • Code P1
  • Conversion factor 1 × 10Ôü╗²
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
internalResistanceIncreaseValue
lastUpdate
Timestamp for dynamic data attributes show the last update time.
Name
lastUpdate
Characteristic
Type http://www.w3.org/2001/XMLSchema#dateTime
Optional
No
In payload
Yes
Payload key
lastUpdate
batteryComponent
Name
batteryComponent
Characteristic
Enumeration
Values
  • pack
  • module
  • cell
Type http://www.w3.org/2001/XMLSchema#string
Optional
No
In payload
Yes
Payload key
batteryComponent

NegativeEventEntity

Properties

Negative events, such as accidents. No further definition provided by regulation.
Name
negativeEvent
Characteristic
Type http://www.w3.org/2001/XMLSchema#string
Optional
No
In payload
Yes
Payload key
negativeEvent
lastUpdate
Timestamp for dynamic data attributes show the last update time.
Name
lastUpdate
Characteristic
Type http://www.w3.org/2001/XMLSchema#dateTime
Optional
No
In payload
Yes
Payload key
lastUpdate

NumberOfFullCyclesEntity

Properties

numberOfFullCyclesValue
Name
numberOfFullCyclesValue
Characteristic
Measurement
Unit
  • cycle
  • Code B7
Type http://www.w3.org/2001/XMLSchema#integer
Optional
No
In payload
Yes
Payload key
numberOfFullCyclesValue
lastUpdate
Timestamp for dynamic data attributes show the last update time.
Name
lastUpdate
Characteristic
Type http://www.w3.org/2001/XMLSchema#dateTime
Optional
No
In payload
Yes
Payload key
lastUpdate

PowerCapabilityAtEntity

Properties

atSoC
Name
atSoC
Characteristic
Measurement
Unit
  • percent
  • Symbol %
  • Code P1
  • Conversion factor 1 × 10Ôü╗²
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
atSoC
powerCapabilityAt
Name
powerCapabilityAt
Characteristic
Measurement
Unit
  • percent
  • Symbol %
  • Code P1
  • Conversion factor 1 × 10Ôü╗²
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
powerCapabilityAt

RemainingCapacityEntity

Properties

remainingCapacityValue
Name
remainingCapacityValue
Characteristic
Measurement
Unit
  • kilowatt hour
  • Symbol kW·h
  • Code KWH
  • Conversion factor 3.6 × 10Ôü J
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
remainingCapacityValue
lastUpdate
Timestamp for dynamic data attributes show the last update time.
Name
lastUpdate
Characteristic
Type http://www.w3.org/2001/XMLSchema#dateTime
Optional
No
In payload
Yes
Payload key
lastUpdate

RemainingEnergyEntity

Properties

remainingEnergyalue
Name
remainingEnergyalue
Characteristic
Measurement
Unit
  • kilowatt hour
  • Symbol kW·h
  • Code KWH
  • Conversion factor 3.6 × 10Ôü J
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
remainingEnergyalue
lastUpdate
Timestamp for dynamic data attributes show the last update time.
Name
lastUpdate
Characteristic
Type http://www.w3.org/2001/XMLSchema#dateTime
Optional
No
In payload
Yes
Payload key
lastUpdate

RemainingPowerCapabilityDynamicAt

Extends PowerCapabilityAtEntity

Properties

rPCLastUpdated
Name
rPCLastUpdated
Characteristic
Type http://www.w3.org/2001/XMLSchema#dateTime
Optional
No
In payload
Yes
Payload key
rPCLastUpdated
atSoC
Name
atSoC
Characteristic
Measurement
Unit
  • percent
  • Symbol %
  • Code P1
  • Conversion factor 1 × 10Ôü╗²
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
atSoC
powerCapabilityAt
Name
powerCapabilityAt
Characteristic
Measurement
Unit
  • percent
  • Symbol %
  • Code P1
  • Conversion factor 1 × 10Ôü╗²
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
powerCapabilityAt

RemainingPowerCapabilityEntity

Properties

remainingPowerCapabilityValue
Name
remainingPowerCapabilityValue
Characteristic
SingleEntity
Type urn:samm:io.BatteryPass.Performance:1.2.0#RemainingPowerCapabilityDynamicAt
Optional
No
In payload
Yes
Payload key
remainingPowerCapabilityValue
lastUpdate
Timestamp for dynamic data attributes show the last update time.
Name
lastUpdate
Characteristic
Type http://www.w3.org/2001/XMLSchema#dateTime
Optional
No
In payload
Yes
Payload key
lastUpdate

RemainingRoundTripEnergyEfficiencyEntity

Properties

remainingRoundTripEnergyEfficiencyValue
Name
remainingRoundTripEnergyEfficiencyValue
Characteristic
Measurement
Unit
  • percent
  • Symbol %
  • Code P1
  • Conversion factor 1 × 10Ôü╗²
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
remainingRoundTripEnergyEfficiencyValue
lastUpdate
Timestamp for dynamic data attributes show the last update time.
Name
lastUpdate
Characteristic
Type http://www.w3.org/2001/XMLSchema#dateTime
Optional
No
In payload
Yes
Payload key
lastUpdate

StateOfCertifiedEnergyEntity

Properties

stateOfCertifiedEnergyValue
Name
stateOfCertifiedEnergyValue
Characteristic
Measurement
Unit
  • percent
  • Symbol %
  • Code P1
  • Conversion factor 1 × 10Ôü╗²
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
stateOfCertifiedEnergyValue
lastUpdate
Timestamp for dynamic data attributes show the last update time.
Name
lastUpdate
Characteristic
Type http://www.w3.org/2001/XMLSchema#dateTime
Optional
No
In payload
Yes
Payload key
lastUpdate

StateOfChargeEntity

Properties

stateOfChargeValue
Name
stateOfChargeValue
Characteristic
Measurement
Unit
  • percent
  • Symbol %
  • Code P1
  • Conversion factor 1 × 10Ôü╗²
Type http://www.w3.org/2001/XMLSchema#float
Optional
No
In payload
Yes
Payload key
stateOfChargeValue
lastUpdate
Timestamp for dynamic data attributes show the last update time.
Name
lastUpdate
Characteristic
Type http://www.w3.org/2001/XMLSchema#dateTime
Optional
No
In payload
Yes
Payload key
lastUpdate

TemperatureConditionsEntity

Properties

timeExtremeHighTemp
Cumulated time spent above the given upper boundary of temperature.
Name
timeExtremeHighTemp
Characteristic
Measurement
Unit
  • minute [unit of time]
  • Symbol min
  • Code MIN
  • Conversion factor 60 s
Type http://www.w3.org/2001/XMLSchema#double
Optional
No
In payload
Yes
Payload key
timeExtremeHighTemp
timeExtremeLowTemp
Cumulated time spent below the given lower boundary of temperature.
Name
timeExtremeLowTemp
Characteristic
Measurement
Unit
  • minute [unit of time]
  • Symbol min
  • Code MIN
  • Conversion factor 60 s
Type http://www.w3.org/2001/XMLSchema#double
Optional
No
In payload
Yes
Payload key
timeExtremeLowTemp
timeExtremeHighTempCharging
Cumulated time spent above the given upper boundary of temperature during Charging.
Name
timeExtremeHighTempCharging
Characteristic
Measurement
Unit
  • minute [unit of time]
  • Symbol min
  • Code MIN
  • Conversion factor 60 s
Type http://www.w3.org/2001/XMLSchema#double
Optional
No
In payload
Yes
Payload key
timeExtremeHighTempCharging
timeExtremeLowTempCharging
Cumulated time spent below the given lower boundary of temperature during charging.
Name
timeExtremeLowTempCharging
Characteristic
Measurement
Unit
  • minute [unit of time]
  • Symbol min
  • Code MIN
  • Conversion factor 60 s
Type http://www.w3.org/2001/XMLSchema#double
Optional
No
In payload
Yes
Payload key
timeExtremeLowTempCharging
lastUpdate
Timestamp for dynamic data attributes show the last update time.
Name
lastUpdate
Characteristic
Type http://www.w3.org/2001/XMLSchema#dateTime
Optional
No
In payload
Yes
Payload key
lastUpdate
Third party licenses